NEW FEATURE No. 5 – AppSense Environment Manager 8.0 Service Pack 2 – Run Once

August 28, 2009

This is the fifth installment in a series of posts about the new features and options in AppSense Version 8 Service Pack 2.  (If you have not yet downloaded this latest release, you can read more info and download it from here )

AppSense Environment Manager 8.0 Service Pack 2 introduces a new condition – Run Once.

When the Run Once condition is utilized on a specific trigger, the condition ensures that any child actions or conditions only run once during that logged on session.

This condition is available only from trigger nodes that run more than once per session, and therefore excludes the following:

  • Computer | Startup
  • Computer | Shutdown
  • User | Logon
  • User | Logoff

Each Run Once condition uses its own unique internal variable to monitor when the condition is satisfied. This enables any number of conditions to be utilized but only once within the current session. So, for example, you could pop up a ‘maintenance’  warning message only the first time a specific application is launched within that session.

Tip It is possible to change the Run Once condition to become a ‘Run More than Once’ condition by editing an existing Run Once condition and selecting ‘Ctrl‐Alt‐Right Click’ in the dialog to bring up a new counter spin control. Altering the counter value from ‘1’ to the desired number will change the action to a ‘Run More than Once’ action.

P:S
As this is an ever growing blog topic, the previous posts on the other new features we have detailed can be found below:

NEW FEATURE No. 1 – AppSense Environment Manager 8.0 Service Pack 2 – Run As

NEW FEATURE No. 2 – AppSense Environment Manager 8.0 Service Pack 2 – Connect As

NEW FEATURE No. 3 – AppSense Environment Manager 8.0 Service Pack 2 – Improved compression and data handling protocol

NEW FEATURE No. 4 – AppSense Environment Manager 8.0 Service Pack 2 – Manipulation of files in Personalization Analysis

NEW FEATURE No. 5 – AppSense Environment Manager 8.0 Service Pack 2 – Run Once

NEW FEATURE No. 6 – AppSense Environment Manager 8.0 Service Pack 2 – Group SID Refresh

NEW FEATURE No. 7 – AppSense Environment Manager 8.0 Service Pack 2 – Trigger Action Time Audit Event

NEW FEATURE No. 8 – AppSense Environment Manager 8.0 Service Pack 2 – Stop If Fails

NEW FEATURE No. 9 – AppSense Environment Manager 8.0 Service Pack 2 – New Application Categories in the User Interface

NEW FEATURE No. 10 – AppSense Environment Manager 8.0 Service Pack 2 – Refresh

NEW FEATURE No. 11 – AppSense Environment Manager 8.0 Service Pack 2 – Registry Hive Exclusions


NEW FEATURE No. 4 – AppSense Environment Manager 8.0 Service Pack 2 – Manipulation of files in Personalization Analysis

August 27, 2009

This is the fourth installment in a series of posts about the new features and options in AppSense Version 8 Service Pack 2.  (If you have not yet downloaded this latest release, you can read more info and download it from here )

AppSense Environment Manager 8.0 Service Pack 2 introduces the ability to manipulate file settings from within the Personalization Analysis dialog for a selected user’s application.

Files can now be inserted, edited and removed.

The “View Application File List” has been improved to allow:

  • Existing files to be exported from the cache
  • New files to be imported into the cache
  • Existing files to be deleted from the cache
  • Existing files to be opened for editing

This can be seen in the screenshot below:

View File List

View File List

P:S
As this is an ever growing blog topic, the previous posts on the other new features we have detailed can be found below:

NEW FEATURE No. 1 – AppSense Environment Manager 8.0 Service Pack 2 – Run As

NEW FEATURE No. 2 – AppSense Environment Manager 8.0 Service Pack 2 – Connect As

NEW FEATURE No. 3 – AppSense Environment Manager 8.0 Service Pack 2 – Improved compression and data handling protocol

NEW FEATURE No. 4 – AppSense Environment Manager 8.0 Service Pack 2 – Manipulation of files in Personalization Analysis

NEW FEATURE No. 5 – AppSense Environment Manager 8.0 Service Pack 2 – Run Once

NEW FEATURE No. 6 – AppSense Environment Manager 8.0 Service Pack 2 – Group SID Refresh

NEW FEATURE No. 7 – AppSense Environment Manager 8.0 Service Pack 2 – Trigger Action Time Audit Event

NEW FEATURE No. 8 – AppSense Environment Manager 8.0 Service Pack 2 – Stop If Fails

NEW FEATURE No. 9 – AppSense Environment Manager 8.0 Service Pack 2 – New Application Categories in the User Interface

NEW FEATURE No. 10 – AppSense Environment Manager 8.0 Service Pack 2 – Refresh

NEW FEATURE No. 11 – AppSense Environment Manager 8.0 Service Pack 2 – Registry Hive Exclusions


NEW FEATURE No. 3 – AppSense Environment Manager 8.0 Service Pack 2 – Improved compression and data handling protocol

August 26, 2009

This is the third installment in a series of posts about the new features and options in AppSense Version 8 Service Pack 2.  (If you have not yet downloaded this latest release, you can read more info and download it from here )

AppSense Environment Manager 8.0 Service Pack 2 introduces a new protocol for transferring data between the endpoint device and the server database which holds all the user personalization settings.

The change means that the Personalization Server now benefits as it has to do a lot less processing in order to insert or extract the required data from the database, and can therefore support a lot more users and even faster response times.

Part of this change is to store the user’s personalization data in a compressed format in the database, which means the required database footprint is a lot smaller (in some cases by a factor of 10).

Internal performance tests yielded the following results:

  • 87.5% increase in performance scalability between version 8.0 and 8.0 SP2.
  • 45.0% increase in performance scalability between version 8.0 SP1 and 8.0 SP2.

Note: On upgrade to Service Pack 2, User Personalization data is in the old protocol format. This data is upgraded to the new format, in the database, on demand as applications are used and such, will incur a small performance hit on first launch. However, once all endpoints are upgraded to Service Pack 2 and all data in the database has been upgraded, the performance of User Personalization will be much higher than previous releases and scalability will be dramatically improved.

As always, if you have any questions or require any further information, please do get in touch.

P:S
As this is an ever growing blog topic, the previous posts on the other new features we have detailed can be found below:

NEW FEATURE No. 1 – AppSense Environment Manager 8.0 Service Pack 2 – Run As

NEW FEATURE No. 2 – AppSense Environment Manager 8.0 Service Pack 2 – Connect As

NEW FEATURE No. 3 – AppSense Environment Manager 8.0 Service Pack 2 – Improved compression and data handling protocol

NEW FEATURE No. 4 – AppSense Environment Manager 8.0 Service Pack 2 – Manipulation of files in Personalization Analysis

NEW FEATURE No. 5 – AppSense Environment Manager 8.0 Service Pack 2 – Run Once

NEW FEATURE No. 6 – AppSense Environment Manager 8.0 Service Pack 2 – Group SID Refresh

NEW FEATURE No. 7 – AppSense Environment Manager 8.0 Service Pack 2 – Trigger Action Time Audit Event

NEW FEATURE No. 8 – AppSense Environment Manager 8.0 Service Pack 2 – Stop If Fails

NEW FEATURE No. 9 – AppSense Environment Manager 8.0 Service Pack 2 – New Application Categories in the User Interface

NEW FEATURE No. 10 – AppSense Environment Manager 8.0 Service Pack 2 – Refresh

NEW FEATURE No. 11 – AppSense Environment Manager 8.0 Service Pack 2 – Registry Hive Exclusions


NEW FEATURE No. 2 – AppSense Environment Manager 8.0 Service Pack 2 – Connect As

August 25, 2009

Here is the second installment in a series of posts about the new features and options in AppSense Version 8 Service Pack 2.  (If you have not yet downloaded this latest release, you can read more info and download it from here )

AppSense Environment Manager 8.0 Service Pack 2 introduces a new option – Connect As.

Similar in functionality to the Run As option (see previous post), the Connect As option is only available from the Drive and Printers Actions.

This new feature can be used in conjunction with the existing AppSense Environment Manager policy actions, one example is that of mapping a shared network drive or folder, where multiple users would connect with the same user name and password.  By using AppSense Environment Manager and the new Connect As command, all required users will have the drive automatically mapped with the shared user name and password.

Note: When connecting as a specified user, AppSense Environment Manager impersonates the current user. This ensures the connection is added to the correct location in the registry

P:S
As this is an ever growing blog topic, more posts on the other new features we have detailed can be found below:

NEW FEATURE No. 1 – AppSense Environment Manager 8.0 Service Pack 2 – Run As

NEW FEATURE No. 2 – AppSense Environment Manager 8.0 Service Pack 2 – Connect As

NEW FEATURE No. 3 – AppSense Environment Manager 8.0 Service Pack 2 – Improved compression and data handling protocol

NEW FEATURE No. 4 – AppSense Environment Manager 8.0 Service Pack 2 – Manipulation of files in Personalization Analysis

NEW FEATURE No. 5 – AppSense Environment Manager 8.0 Service Pack 2 – Run Once

NEW FEATURE No. 6 – AppSense Environment Manager 8.0 Service Pack 2 – Group SID Refresh

NEW FEATURE No. 7 – AppSense Environment Manager 8.0 Service Pack 2 – Trigger Action Time Audit Event

NEW FEATURE No. 8 – AppSense Environment Manager 8.0 Service Pack 2 – Stop If Fails

NEW FEATURE No. 9 – AppSense Environment Manager 8.0 Service Pack 2 – New Application Categories in the User Interface

NEW FEATURE No. 10 – AppSense Environment Manager 8.0 Service Pack 2 – Refresh

NEW FEATURE No. 11 – AppSense Environment Manager 8.0 Service Pack 2 – Registry Hive Exclusions


NEW FEATURE No. 1 – AppSense Environment Manager 8.0 Service Pack 2 – Run As

August 24, 2009

This is the first installment in a series of posts about the new features and options in AppSense Version 8 Service Pack 2.  (If you have not yet downloaded this latest release, you can read more info and download it from here )

AppSense Environment Manager 8.0 Service Pack 2 introduces a new option – Run As.

This emulates the Microsoft Run As command and allows actions to be executed in the context of another, specified user.  For example launching an application in a different user context.

When selecting the Run As tab in an action you are presented with one, two or three options:

Current User: Available on all relevant User actions. This is the default selected method and runs the action in the context of the logged on user.

System: Available on all actions. This is the default method for Computer nodes and runs the action in the context of the System user.

User: Available on all relevant User actions. On selection of this option the administrator is prompted to select a friendly name to run as. If no friendly name exists, the Run As Library can be launched where friendly names, usernames and passwords can be stored for re‐use.

The friendly names are stored in the configuration in a reusable library section. Each friendly name is accompanied by the username and password. The password is encrypted using a one‐way public key. This prevents passwords from being reverse engineered.

During installation of the AppSense Environment Manager Agent, the private key is added to the machines key store. This is a write only store, i.e. it cannot be read.

When an action is run as a specified user the associated username and password are used to impersonate said user. AppSense Environment Manager uses a handle to the private key to decrypt the password at this point.

Note: The Run As specified user only impersonates that user. This means the user’s profile and registry hive are not loaded from the domain due to the associated overhead. This results in the environment variables for the action representing the System user and not the currently logged on user or specified user.

Note: This is both a very powerful and potentially dangerous function. Even though the password is encrypted, the username and password pair can be applied to any action and a malicious user may be able to alter the configuration to possibly bypass security. Therefore, this function must be used with extreme care.

P:S
As this is an ever growing blog topic, more posts on the other new features we have detailed can be found below:

NEW FEATURE No. 1 – AppSense Environment Manager 8.0 Service Pack 2 – Run As

NEW FEATURE No. 2 – AppSense Environment Manager 8.0 Service Pack 2 – Connect As

NEW FEATURE No. 3 – AppSense Environment Manager 8.0 Service Pack 2 – Improved compression and data handling protocol

NEW FEATURE No. 4 – AppSense Environment Manager 8.0 Service Pack 2 – Manipulation of files in Personalization Analysis

NEW FEATURE No. 5 – AppSense Environment Manager 8.0 Service Pack 2 – Run Once

NEW FEATURE No. 6 – AppSense Environment Manager 8.0 Service Pack 2 – Group SID Refresh

NEW FEATURE No. 7 – AppSense Environment Manager 8.0 Service Pack 2 – Trigger Action Time Audit Event

NEW FEATURE No. 8 – AppSense Environment Manager 8.0 Service Pack 2 – Stop If Fails

NEW FEATURE No. 9 – AppSense Environment Manager 8.0 Service Pack 2 – New Application Categories in the User Interface

NEW FEATURE No. 10 – AppSense Environment Manager 8.0 Service Pack 2 – Refresh

NEW FEATURE No. 11 – AppSense Environment Manager 8.0 Service Pack 2 – Registry Hive Exclusions